{{parseInt(detail_data.left_num) ? detail_data.left_num +' In Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Specifications
• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
• PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F)
• Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 1.50"
Description
Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.
Frequently Asked Questions
1) Filament not extruding properly?
A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.
2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.
3) Won't the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. You can use this on the build platform on top of kapton tape.
*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.
SHIPPING TERMS
1. Ship to whole world : DHL, UPS, FEDEX, EMS, ,,
2. Lead time:1-3days after payment reached.
PAYMENT TERMS
We accept PAYPAL, TT, WESTERN UNION, ESCROW, MONEY GRAM
GUARANTEE PERIOD
1. We offer real reliable quality information to the customer;
2. 30 days with guarantee with submitted for non-original parts;
3. Any problem , please let us know asap
4. If goods should be returned , please keep original condition;
5. All transportation costs shall be borne by the buyers.
ABOUT US
1) More than 10 years business enable us accumulated much experience in 3d products filed;
2) Lots of products in our own store and stock, fast shipment is supported;
3) We are ability to control and detect the quality,could make sure the quality for you;
4) HIC is our brand, we have our own engineer for tech-support for 3d printer problems.
5) Service for customer will be improved in our daily work;
6) Be your reliable supplier in SZ of China is our pursue.
FAQ
1) Filament not extruding properly?
A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.
2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.
3) Won't the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way.
CONTACT US
Catherine
HIC Technology Co., Ltd.
B1305, Niu Lan Qian Building, Minzhi Road, Long Hua Town, Shenzhen, China
Skype: catherine L
Email: catherine@hictop3dprinter.com
PRODUCT ITEM SHOW
{{item.displayed_price.unit_prefix}} {{item.displayed_price.min}}
{{item.displayed_price.unit_prefix}}
{{item.displayed_price.original_min}}
United States
Carrier
CostDelivery TimeTracking
Company
CostTime
{{ shipitem.name }}
Free Shipping To Be Negotiated {{detail_data.currency.unit_prefix}} {{shipitem.price}} {{shipitem.datemin}}-{{shipitem.datemax}} days Available
{{reply_items.text}}By {{reply_items.author}}