{{parseInt(detail_data.left_num) ? detail_data.left_num +' In Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
OBDII/BOOT Protocols Hand-Held ECU Programmer Touch MAP Get Free FGTech Galletto 2-Master V50
TOP 10 Reasons to get Genius ECU Tuning Tool:
1. Newest Hardware: 5.005.003, Newly Add More ECU Models, Like VAG DQ500 and VAG DQ250
2.Multi-Language: English,Italian,German,French,Spanish,Portuguese,Hungarian
3.No tokens limitation:There is 30 tokens by default, after the tokens use up, you can simply press tokens reset button to reovery.
4.With ECM1.61 and Winols 2.24 inside the package
5.Get a free FGTech Galletto 2-Master as gift.
6.System updates via USB,automatically backup.
7.World’s first Touch & Map device, allows you to read/programm the ECU in modern vehicles through OBD2
8.Easy to use ,with touch screen and intuitive menu.
9.Kess V2 Update Version, Supports More Vehicles, directly connect cars and K TOUCH to read the data. Just install the software on PC to modify the data.
10.Completely independent of the PC during the phases of read/write.
Note:
1.Never connect Network, operating system can be on WIN XP and WIN7.
2.No support Toyota obd only write med17.5.2. and 17.5.21 (not tested)
3.New Genius & Flash Point tokens reset button:
Firmware version: V5.05 (can read/write VAG DQ200&DQ250)
Cars
Bikes
LCV
Trucks
Tractors / Agricultural
Marine
It is equipped with a sophisticated system for the recovery of the ECU should any problems occur during programming.
The New Genius is controlled through a system of icons from your TOUCH PANEL touchscreen, this makes it extremely easy to use. A standard 16 pin OBD cable is included and specific connectors to work on making diagnosis and special cables to do so through direct connection to the connector or plate ECU.
As a consequence of the requests received from the market, a specific software has been developed for the independent management of New Genius called DS Manager. This is dedicated to skilled tuners who prefer to develop tuned files with third party editing software. DS Manager can decrypt and encrypt files received from New Genius, so allowing the possibility to export files for the modification. No editing functions are supported. Also for this specific software, a specific tool for the automatic checksum recalculation is provided.
When you install PC software ,if it pops up below error,please try to download in the CD,you can also download from
: https://mega.nz/#!0YQkXI6C!ubU19RfbmKmSG3SzuAiAPldQHCGsvSA-U7unpYezbvs
ABS plastic enclosure with ergonomic grip system safe.
LCD display 320 x 240 pixels, CCFL back light with Touch Panel.
Flash memory chip 512K bytes protected.
16 MB RAM memory.
SD card of 1 GB expandable.
LED status SD.
Internal clock with memory.
Lithium 3 volts.
Rechargeable battery 600 mAh 8.4V.
Supply voltage from 12V to 30V.
Communication via K line, L line, CAN-bus 2.0 and J1850.
1) Check the ECU type on new genuine supported ECU list: http://www.obd2express.co.uk/upload/pro/genius-flash-point-obdii-boot-ecu-hand-held-chip-tuning-vehicle-list.pdf
Such as your car is marelli iaw 7sm, search on this list, you will find your ECU is FLASH_0436
2) Download the new genius supported protocol: http://www.mediafire.com/download/ir1ixs6ddsv1i3f/SE128-Protocol.zip, if you can find FL-0436 on protocol, then this one is supported.
Product Name | New Genius | Best Quality Kess V2 (SE87-D) |
Language | English, Italian, German, French, Spanish, Portuguese, Hungarian | English, German, Spanish, Italian, Portuguese, French |
Software | -- | V2.15 |
Hardware | V5.05 | V4.036 |
Tokens | No Tokens Limitation,30 Tokens come with device by default, you can press the tokens reset buttonon the back of hardware to get new Tokens | No Tokens Limitation, there is renew buttonon the main unit. This button is used to charge tokens. Once your tokens run over, just click this button, then tokens will go back to 30 tokens. |
Update | via hardware | via hardware |
Support Protocols | Supports CAN-BUS, KWP and J1850 protocols | Line, CAN, EDC17 and MED17 and Ford J1850 |
Support Vehicle | Car, Bikes, LCV Support more new vehicle than Kess V2 | Car and Bike |
PC | Hand-held ECU Chip Tuning Tool, no PC need; software is inside the machine already directly to use | PC-based ECU Programmer, you need install the software by yourself |
Method | Read and Write ECU via OBD2 directly | same |
Tested on:
Simos 18 tested ok. Don't know about simos 12
Tested on many cars Kline an Can and work 100% fine only checksum need to do manually
All simos,denso mitsu ..all ok
Tested on tricore edc17c10 all ok
EDC17C64 ID & WRITE ok (1.6TDI)
MED17.5.5 ID & READ & WRITE ok
ME7.5 ID & READ & WRITE ok
MED17.5.21 ID & WRITE ok
Sagem 3000 ID & READ & WRITE ok
Opel ME7.6.2 ID & READ & WRITE ok
Mercedes EDC16C2 ID & READ & WRITE ok
Simos 12 & 18 ID & WRITE ok
Checksum recalculated with Genuine Race Evo software for all of my tunes.
2014 Ford Fiesta Ecoboost 1.0 125hp auto
-> Read ok
-> Write ok
2013 Mitsubishi ASX/Outlander Sport 2.0 4B11 CVT
-> Read ok
-> Write ok
2014 Chevrolet Orlando 1.8 Petrol Auto
-> Read ok
-> Write ok
2015 Mitsubishi Montero Sport/Pajero Sport 2.5DiD 178hp auto
-> Read ok
-> Write ok
Can make Opel Zafira , Combo , Meriva Denso ECU
Tested psa edc17c10 read on boot and test write by obd ok
No support Toyota obd only write med17.5.2. and 17.5.21 (not tested)
1. ECU Chip tunning software: it is unfriendly and you are supposed to be skilled enough to use it.
2. Boot wiring diagram and instruction.
3. K-touch setup software: the folder "setup3" contains "setup3 manually.zip" and "setup3 xp automatic.exe" , xp user just directly click "setup3 xp automatic.exe" and follow the prompt to operate; win7 user firstly extract file "setup3 manually.zip" and get "raceloc.dll", then manually replace raceloc.dll C:\Users\Your PC Name\AppData\Local\DimWare\RaceEVO\7.0.
4. TF FIX folder contains a video on how to reset the TF program. Note: change other TF card is not allowed, you have to use the built-in TF card.
5. How to renew the token video demo. After renew the machine get 30 tokens.
6. Install read me. Txt: contain simple setup instructions.
7. K-touch vehicle list for reference.
8. K-touch install on win7 procedure. Note: disconnect the network connection when you install and use k-touch, update device and software is not allowed.
9. K-touch install on windows xp procedure. Note: disconnect the network connection when you install and use k-touch, update device and software is not allowed.
10. Decompression software
For any question, pls contact us:
Email: cathy@hippotech.net
MSN: cathy11005@hotmail.com
Skype: cathy11005
Whatsapp: +86-13410121786
{{item.displayed_price.unit_prefix}} {{item.displayed_price.min}}
{{item.displayed_price.unit_prefix}}
{{item.displayed_price.original_min}}
United States
Carrier
CostDelivery TimeTracking
Company
CostTime
{{ shipitem.name }}
Free Shipping To Be Negotiated {{detail_data.currency.unit_prefix}} {{shipitem.price}} {{shipitem.datemin}}-{{shipitem.datemax}} days Available
{{reply_items.text}}By {{reply_items.author}}